Toolbar: Filter

Use the Filter toolbar to filter the data displayed in the grid or Timeline pane.

Use This

To Do This

View the amount of data that is displayed. This is determined by the applied filters. The filter percentage is based on the values in the Data of Interest column marked with a yellow star in the result tab. The grayed-out area represents the amount of data that is filtered out of the current view. The information is also presented in text format. In this example, 44% of the data is shown.

Module drop-down menu

Select the module to show. All data related to other modules is hidden.

By default [All] is selected. This option does not filter any data.

Thread drop-down menu

Select the thread to show. All data related to other threads is hidden.

By default [All] is selected. This foption does not filter any data.

Process drop-down menu

Select the process to show. All data related to other threads is hidden.

By default [All] is selected. This option does not filter any data.

Sleep States drop-down menu

Filter data by the sleep state (C0 - Cn). The deeper the sleep state of the CPU is, the greater power savings are.

This filter is available for CPU Sleep States analysis results only.

Wake-up Reason drop-down menu

Filter data by types of the objects that force the processor to wake up. Possible wake-up reasons are timer, interrupt, IPI, and so on.

This filter is available for CPU Sleep States analysis results only.

Timer Type drop-down menu

Filter data by type of the timers that force the processor to wake up. Choose between User and Kernel Timers.

This filter is available for CPU Sleep States analysis results only.

Utilization drop-down menu

Filter data in the grid by available CPU time utilization modes.

This filter is available for the user-mode sampling and tracing analysis results.

Inline Mode drop-down menu

Enable/Disable displaying performance data per inline functions. This option is supported if you compile your code using

GCC* compiler 4.1 (or higher)
Intel® Composer XE (12.1.333) or higher, with the -debug inline-debug-info option enabled

Call Stack Mode drop-down menu

Select whether to show system functions.

Use This	To Do This
Only user functions	Filter out all system functions.
User/system functions	Do not filter any data.
User functions + 1 (default)	Filter out all system functions except those directly called from user functions.

Loop Mode drop-down menu

Select a type of hierarchy to display loop data in the grid. The following types are available:

Use This

To Do This

Loops only

Display loops as regular nodes in the tree. Loop name consists of:

start address of the loop
number of the code line where this loop is created
name of the function where this loop is created

Loops and functions

Display both loops and functions as separate nodes.

Functions only

Display data by function with no loop information (default mode).

Remove all filters and view all the available data.

Toolbar: Filter

See Also